Wind Power Lightning Grounding Brush Holder MTS160320H037D
Product Description
1. Convenient installation and reliable structure.
2. Cast silicon brass material, reliable performance.
3. Each brush grip holds a carbon brush, which has adjustable pressure and is applied to the commutator.
Technical Specification Parameters
|
Brush holder material grade:ZCuZn16Si4 《GBT 1176-2013 Cast copper and copper alloys》 |
|||||
|
Pocket size |
A |
B |
C |
H |
L |
|
16*32 |
32 |
16 |
8.5 |
40 |
30.5 |
Order Instruction
Non-standard Customization is Optional
Materials and dimensions can be customized, and the normal brush holders’ opening period is 45 days, which takes a total of two months to process and deliver the finished product.
The specific dimensions, functions, channels and related parameters of the product shall be subject to the drawings signed and sealed by both parties. If the above mentioned parameters are changed without prior notice, the Company reserves the right of final interpretation.
Main advantages:
Rich brush holder manufacturing and application experience
Advanced research and development and design capabilities
Expert team of technical and application support, adapt to various complicated working environment, customized according to customer's specific requirements
Better and overall solution
Company Introduction
Morteng is a leading manufacturer of brush holder, carbon brush and slip ring assembly over 30 years. We develop, design and manufacture total engineering solutions for service companies, distributors and OEMs. We providing our customers with competitive price, high quality, fast lead time products.
Certificate
FAQ
1.Clearance fit between brush holder and carbon brush
If the square mouth is too large or the carbon brush is too small, the carbon brush will wander around in the brush box in operation, which will cause the problem of lighting and current inequality. If the square mouth is too small or the carbon brush is too large, the carbon brush can not be installed in the brush box
2.Center distance dimension
If the distance is too long or too short, the carbon brush is unable to grind to the center of the carbon brush, and the phenomenon of grinding deviation will occur
3.The installation slot
If the installation slot is too small, then it can’t be installed.
4.The constant pressure
The pressure or tension of the constant compression spring or tension spring is too high, which causes the carbon brush to wear too fast and the contact temperature between the carbon brush and the torus is too high
Packaging
